Lanier LD235, Copy Reference Manual

Page: 78 / 134

Copying
68
2
Note
❒
You can specify the stamp posi-
tion, pages to be stamped, and
numbering. See p.68 “Changing
the stamp position” and p.68
“Specifying the first printing
page and start number”.
E
After you specify all desired set-
tings, press
[ OK ] .
F
Press [ OK ] .
G
Place the originals, and then press
the
{
Start
}
key.
Changing the stamp position
A
Press [ Change ] .
B
Select the desired position, and
then press
[ OK ] .
Specifying the first printing page and
start number
If you selected (P1, P2…, -1-,-2-…,
P.1, P.2…, 1, 2…, )
Note
❒
Below explains the example when
(P1, P2...) is selected. The steps are
the same for other cases.
A
Press [ Change ] on the right side.
B
Press [ First Printing Page ] , enter the
o r i g i n a l s h e e t n u m b e r f r o m
which to start printing, and then
press the
{
#
}
key.
Note
❒
To change the number entered,
press
[ Clear ] or the
{
Clear/Stop
}
key, and then enter a new
number.
C
Press
[ Numbering from / to ]
, enter
the number of the page from
which to start numbering with
the number keys, and then press
the
{
#
}
key.
Note
❒
The example below shows when
the first printing page is “2”and
the start number is “3”.
GCANPE2J