Lanier LD235, Copy Reference Manual

Page: 28 / 134

Copying
18
2
-
How to operate
❖
To stop the machine during a multi-
copy run.
Press the
{
Clear/Stop
}
key.
❖
To return the machine to the initial
condition after copying.
Press the
{
Clear Modes
}
key.
❖
When clearing entered values.
Press the
{
Clear/Stop
}
key or [ Clear ]
on the display.
❖
To check the settings.
Press the
{
Check Modes
}
key.
Interrupt Copy
Use this function if you want to inter-
rupt a long copy job to make urgently
needed copies.
Limitation
❒
You cannot use the Interrupt Copy
function when fax originals are be-
ing scanned or the scanner func-
tion is being used.
A
Press the
{
Interrupt
}
key.
The Interrupt indicator goes on.
When the originals stop scanning
A
Remove the originals that were
being copied and place the
originals you want to copy.
B
Press the
{
Start
}
key.
The machine starts making the
copies.
C
When copying is complete, re-
move the originals and copies.
D
Press the
{
Interrupt
}
key again.
The
Interrupt
indicator goes off.
E
When the display prompts you,
place the remaining originals
again before interrupting.
F
Press the
{
Start
}
key.
Note
❒
The interrupt copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
When the machine keeps
copying
A
Place the originals you want to
copy.
B
Press the
{
Start
}
key.
The machine stops the previous
original job and starts copying
the original.
C
When copying is complete, re-
move originals and copies.
D
Press the
{
Interrupt
}
key again.
The Interrupt indicator goes off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒
See p.94 “Tone: Original remains”.