manualshive.com logo in svg

Lanier LD1110, Operating Instructions Manual

Share
Download
Lanier LD1110 Operating Instructions Manual Download Page 134

Copying

114

2

G

Press 

[

m

Program

]

, and then press the stamp number you want to program.

H

Enter the user stamp name (up to ten characters) with the letter keys, and
then press 

[

OK

]

.

I

Enter the horizontal size of the stamp with the number keys, and then press
the 

{

q

}

 key.

J

Enter the vertical size of the stamp with the number keys, and then press
the 

{

q

}

 key.

K

Place the original for user stamp on the exposure glass, and then press 

[

Start

Scanning

]

.

The original will be scanned, and the stamp will be registered. 

L

Press 

[

Exit

]

.

M

Press 

[

Exit

]

.

The display returns to the User Tools menu screen.

N

Press 

[

Exit

]

.

Exits settings and gets ready to copy.

Note

❒

Stamp numbers with 

m

 already have settings in them. Stamp numbers

that are not registered yet are marked with “Not Programmed”.

❒

If the user stamp number is already being used, the machine will ask you
if you want to overwrite it. To overwrite it, press 

[

Yes

]

; otherwise, press

[

Stop

]

.

❒

Originals cannot be scanned from the ADF when programming the user
stamp.

Summary of Contents for LD1110











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands