Copier/Document Server Features
142
4
Input/Output
This section describes various items of
[
Input/Output
]
under
[
Copier/Document Serv-
er Features
]
.
❖
SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The timing is set to "
5 second(s)
" by default.
❖
Copy Eject Face Method in Glass Mode
You can specify the way in which copies are delivered when copying an orig-
inal placed on the exposure glass.
•
Face Up
• Face Down
❖
Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
• On
You can leave the machine unattended to make copies, but sorted pages
will not be sequential.
•
Off
When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.
❖
Sort/Stack Shift setting
You can specify whethere to shift the Shift Tray in sort mode or stack mode.
•
On
• Off
❖
Insert Separation Sheet
You can specify the number of copy pages for inserting the Separation Sheet
from 1 to 999 pages in increments of 1 page.
Summary of Contents for LD1110
Page 14: ...6...
Page 180: ...Printer Features 172 5...
Page 189: ...Address Book 181 7 Folder You can register the protocol path name and server name SMB FTP NCP...
Page 248: ...Other User Tools 240 8...
