Lanier LD1110, Settings Manual, Page: 55 / 298

General Features
47
2
❖
System Status/Job List Display Time
You can specify how long to display the System Status and Job List display
for.
•
On
• Off
By selecting
[ On ] , you can specify a display time between 10 and 999 seconds.
The timing is set to “ 15 second(s) ” by default.
❖
Time Interval between Printing Jobs
You can set the length of interval between the end of a job and the start of a
new job.
If you select “Set Time”, enter the time, 0 - 999 seconds (in 1 second incre-
ments), using the number keys. Default value is
3 seconds .
• Set Time
• Do not set
❖
ADF Original Table Elevation
You can set the timing for elevating the ADF original table.
•
When original is set
• When [ Start ] is pressed
❖
ADF Feed Speed
When you use thick paper, you can slow down the printing speed to avoid
fusing the image by selecting
[ slow ] .
• Normal
• Slow
❖
Optimum for Thick Paper
You can set the optimum for thick paper to On or Off.
• On
•
Off
❖
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
• Off
•
Normal
• Repeat Time: Medium
• Repeat Time: Long