Langmatz basicguide EK 524, Operating Instructions Manual

Page: 2 / 20

2
Contents
English
General information 3
Safety information 3
Product description 4
3.1 Dimensions 4
Technical data 4
4.1 General 4
4.2 Tactile signalling device 5
4.3 Visual feedback 5
4.4 Signal request by vibrator push-button 5
4.5 Signal request by sensor (option 1) 5
4.6 Signal request by push-button (option 2) 5
4.7 Block diagram 6
Scope of delivery 7
Required tools (not included) 7
Installation 8
7.1 Drilling mounting holes in lighting pole 8
7.2 Opening the signal requesting device 8
7.3 Mounting the bottom part of signal requesting device 9
7.4 Installation of replacement device (hole spacing 80 mm) 10
7.5 Aligning crossing symbol 11
7.6 Replacing crossing symbol 12
Description of the crossing symbols for the visually impaired DIN 32981 12
Mounting the crossing symbol 12
Set-up and function test 13
8.1 Vibration 13
Voltage ranges 13
Settings 13
8.2 Vibrator push-button 14
8.3 Visual feedback (depending on configuration) 15
8.4 Signal request 15
8.5 Speaker (depending on configuration) 16
Accessories 17
Maintenance 18
EU Declaration of Conformity 18
Material defects 19
Quality management 19
Disclaimer/Warranty 19
Contacts 19