Langmatz basicguide EK 524 Operating Instructions Manual Download Page 19

 

19 

  Material defects 

Langmatz shall assume liability for material defects in the product as per Section 434 
BGB  (German  Civil  Code)  for  24  months,  starting  from  the  date  on  the  purchase 
receipt. 
 
Within the scope of liability, all parts that become damaged due to manufacturing or 
material errors shall be replaced or repaired free of charge. 
The purchaser must report any deficiency complaints immediately in writing. 
Claims  for  damages  by  the  purchaser  due  to  material  defects  or  whatever  legal 
reason shall not be accepted. 
 
Any damage or failure caused by the following are also excluded from liability: 

-  incorrect use, 
-  natural wear and tear, 
-  intervention by third parties.  

We accept no liability for damage caused by 

force majeure

 or transport. 

 
Repairs  due  to  a  deficiency  complaint  shall  not  extend  the  warranty  period  for  the 
replaced parts or the product. 
 
This product corresponds to the latest state-of-the-art technology. Nevertheless, if you 
experience any problems with it, please contact our hotline (see chapter 15  Contacts). 
 

  Quality management 

Langmatz 

GmbH’s quality management system is certified to DIN EN ISO 9001. 

  Disclaimer/Warranty 

The  information  in  this  technical  document  is  presented  appropriately  and  correctly 
according  to  technical  regulations  and  to  the  best  of  our  knowledge.  However,  this 
does  not  confer  any  guarantee  of  particular  characteristics.  The  operator  of  the 
products supplied by Langmatz GmbH is expressly obliged in this context  to decide, 
based on his/her own judgement, whether the products are suitable and appropriate 
for  the  application  or  use  being  considered.  The  product  liability  accepted  by 
Langmatz GmbH relates exclusively to our conditions of  sale, delivery and payment. 
Langmatz  GmbH  accepts  no  liability  due  to  random,  indirect  and  resultant 
consequential damage, as well as any damage attributable to any use of the product 
other than for its described and intended purpose. 

  Contacts 

Langmatz GmbH | Am Gschwend 10 
82467 Garmisch-Partenkirchen, Germany 
 
Our hotline:  +49 88 21 920 137  
Telephone: 

+49 88 21 920 0  

Email: 

[email protected]

 

www.langmatz.de

 

 
 

Summary of Contents for basicguide EK 524





















Reviews: