23 / 26
3.4.12 Mounting the ribbon cable
The voltage to the shaft door actuator is supplied via a flexible ribbon cable. The ribbon cable holder is
used for fastening purposes:
Abb. 16: QKS6 L&L with ribbon cable
3.4.13 Console for housing
You can fit the TSG electronic (board plus IP54 housing) with the console on the back of the door operator
(see Abb. 17: console for housing).
Abb. 17: console for housing
3.4.14 Conclusion
At the end of assembly fix the whole door operator at the car and control all adjustments.
Ribbon cable
mounting
