21 / 26
3.4.10.5 Time delay between door drive and drive
A setting can be made so that when an open command is sent from the elevator controller to the door control
device, the drive first moves the shaft door actuator apart and then the door moves up. Parameter
hC
can be
adjusted for this purpose.
3.4.11 Technical data for TSG electronics
3.4.11.1 Overview of TSG drive expansion board
X1:
Connection for drive 1
X2:
Connection for drive 2
X3:
Alternating voltage connection
LED 1:
24[VDC] ok
PE
LED1
(24VD C)
X3
X1
2
1
PE
2
1
~
~
PE
X2
1
5A
Art.-Nr. 1.20.103 30
