10 / 26
3 Assembly Instructions for Mechanical Part
3.1 Fundamental Info
In principle, the door frame is pre-commissioned for all types of doors and are pre-assembled as much as
possible at the factory.
However, there are a few items that still have to be assembled on the cabin doors and adapted on site.
Likewise, adjustments are required on the pulleys, the limit switches as well as the door pusher dogs.
The existing shaft door actuator for shaft opening remains intact in principle, but requires an additional ac-
tuator.
As all the assembly steps for the 2 panel telescopic, 2 panel central and 4 piece central door models are all
similar in principle, the following description deals with all three door types at the same time. Wherever
there are distinct differences, these will be explained explicitly.
WARNING:
For safety reasons all nuts and bolts, which are already tightened upon delivery, must be
re-tightened on-site.
