background image

 

ETL File# 68964 

REV. A

 

THE INFORMATION IN THIS MANUAL IS CRUCIAL AND MUST BE 
RETAINED FOR FUTURE REFERENCE.  READ, UNDERSTAND AND 
FOLLOW THE INSTRUCTIONS AND WARNINGS CONTAINED IN THIS 
MANUAL. 

DANGER 

POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT 
AVOIDED, COULD RESULT IN DEATH. 

 

 

WARNING 

POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT 
AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY. 

 

 

CAUTION 

POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT 
AVOIDED, MAY RESULT IN MINOR OR MODERATE INJURY. 

 

 

NOTICE 

Helpful operation and installation instructions and tips are 
present. 

 

 
 

FOR YOUR SAFETY 

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS 
AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. 
 
WARNING:  IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, 
SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY 
OR DEATH.  READ THE INSTALLATION, OPERATING AND MAINTENANCE 
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS 
EQUIPMENT. 

Model #: 

Purchased From: 
 

Serial #: 
 

Location: 

Date Purchased: 
 

Date Installed: 
 

Purchase Order #: 
 

For Service, Call: 
 

Summary of Contents for LGD




















Reviews: