Lang LGD, Installation, Operation, Maintenance, & Troubleshooting

Page: 6 / 19

ETL File# 68964 6 REV. A
EQUIPMENT DESCRIPTION
Lang Model: LGD
Electric Drop-In Griddle
Exterior
The Griddle dimensions are 26” (66cm) Deep, 5 3/8” (13.65cm) High, and width is
dependent on model number.
The griddle surface is constructed of 1” thick highly polished steel to reduce hot and cold
spots, recovery problems, and ensured even heat through out the griddle.
Controls
Each twelve-inch section has its own easy to use manual thermostat with a temperature
range from 175
°
F to 450
°
F in 25
°
increments.
Each twelve-inch section has a set of 6 kW elements for high efficiency, quick recovery and
outstanding performance.
UNPACKING
Receiving the Griddle
Upon receipt, check for freight damage, both visible and concealed. Visible damage should
be noted on the freight bill at the time of delivery and signed by the carrier's agent.
Concealed loss or damage means loss or damage, which does not become apparent until the
merchandise has been unpacked. If concealed loss or damage is discovered upon unpacking,
make a written request for inspection by the carrier's agent within 15 days of delivery. All
packing material should be kept for inspection. Do not return damaged merchandise to Lang
Manufacturing Company. File your claim with the carrier.
Location
Prior to un-crating, move the griddle as near its intended location as practical. The crating
will help protect the unit from the physical damage normally associated with moving it
through hallways and doorways.
Un-crating
The griddle will arrive completely assembled inside a wood frame covered by cardboard box
and strapped to a skid.
Remove the cardboard cover, cut the straps and remove the
wood frame.
CAUTION THE GRIDDLE IS EXTREMELY HEAVY. FOR SAFE HANDLING, INSTALLER
SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE
MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR
PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO
THE PLACE OF INSTALLATION.
CAUTION ANY STAND, COUNTER OR OTHER DEVICE ON WHICH GRIDDLE WILL BE
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE
GRIDDLE.
CAUTION SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN
CUT.
Remove griddle from skid and place in intended location.