7
Placing the unit onto its side:
. Have oven completely uncrated and sitting
on its shipping crate.
. When using a dolly, place a piece of
plywood on top of the dolly to distribute
the weight evenly. Also have a piece
of cardboard or micro-foam between
plywood and oven to protect the finish from
scratches.
3. Carefully tilt the oven onto its
LEFT SIDE
ONLY (or CONTROL SIDE UP)
NOTE: Turning the unit onto its right side
will damage the control panel.
4. Avoid sudden drops.
Plywood
Cardboard
or
Micro-foam
Control
Panel
IL1214
NEVER
lay oven with the control side down, this will damage the controls.
UNCRATING
The oven will arrive completely assembled inside a wood frame. Prior to uncrating move the oven
as close to its final location as practical. This will protect it from damage associated with moving
(scratches, dings, dropping).
Some hardware, (i.e. casters, legs, stacking kits) may be shipped inside the oven. Please
remove any items before continuing.
It may be necessary during the installation to place the unit on its side (i.e. leg, caster installation, fit
through doors, etc) follow these guidelines to lessen the risk of damage to the unit.
THE OVEN WEIGHS 520 LBS (238KG). FOR SAFE HANDLING, INSTALLER SHOULD
OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS HANDLING
EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF INSTALLATION.
ANY STAND COUNTER OR OTHER DEVICE ON WHICH THE OVEN WILL BE LOCATED
MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE OVEN.
SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN CUT.
CAUTION
CAUTION