![background image](http://html1.mh-extra.com/html/lang/ecco-lmdr-ce/ecco-lmdr-ce_installation-manual_3554262015.webp)
15
8. PROGRAMMING
8.1 Pace Timers
The pace timers can be set at any time. Press and hold the “PACE” button for three
seconds. The display will read out the set time then begin to flash. Press the “1”
minute button to increase the time, or the “2” minute button to decrease the time.
Once the corrected time is set, press and hold the “PACE” button for three seconds to
exit the programming mode.
8.2 Program Enable Buttons
The control can not be put into the programming mode if any of the timers are
running. The two blue dots above the “CINNABON” logo are the program enable
buttons. Press the left dot then the right dot within 3 seconds to put the control into a
programming mode. Once the shelf position buttons are set, press the left dot then
the right dot within 3 seconds to exit the programming mode. There will be no
beeper sound when the buttons are pressed.
8.3 Shelf Position Buttons
Put the control into the programming mode. Press the shelf button to be adjusted once
for
“
C” product, twice for “P” product, or three times for “E” product. The display will
read out “00:00” then begin to flash. Press the one minute timer button to increase the
time, or the two minute timer button to decrease the time. Once the correct time is set
move on to another shelf position button or exit the programming mode.
Summary of Contents for ECCO-LMDR-CE
Page 21: ......