manualshive.com logo in svg

Lang ECCO-LMDR-CE, Installation Manual, Page: 13 / 22

Share
Download
Lang ECCO-LMDR-CE Installation Manual Download Page 13

13

7. OPERATION CONT’D

SHELF BUTTONS

Numbered 1 to 6, these buttons represent different shelf
positions.

Button #

Shelf Position

1

 

Top Left

2

 

Top Right

3

 

Middle left

4

 

Middle Right

5

 

Bottom Left

6

 

Bottom Right

PACE TIMERS

Labeled C, P, and E these buttons are adjustable from one to
thirty minutes.

MINUTE TIMERS

There are two “minute” timers.  “1” is programmed for one
minute, “2” is programmed for two minutes.

TEMP BUTTON

When pressed this button will display the temperature of the
oven.

PROGRAMMING ENABLE BUTTONS

These are “hidden” buttons that allow the times of the shelf
position buttons to be set.

7.3 Status Display

The Status Display (Display) informs the operator of the oven's status.

The Display informs the operator when the oven is ready to bake, or if the oven is
above or below the programmed temperature.

Below is a list of displays and their definitions:

"

PrEht"

Stands for PREHEAT.  A product has been selected and the
oven is heating to the set temperature.

"

rEAdY"

A product has been selected and the oven has preheated to
the programmed temperature.  The oven is ready to load a
product.

"

COOL"

The oven's internal temperature is below what is
programmed.

"HOt"

The oven's internal temperature is above what is
programmed.

"hELP"

There is a fault in the control system, the computer will not
operate until service is performed.

Summary of Contents for ECCO-LMDR-CE























Reviews:

No comments