(850) 610-2870
www.lanesharkusa.com
8
Lane Shark LS-3
INTRODUCTION
GENERAL INFORMATION
APPLICATION
•
The Lane Shark LS-3 is a light duty rotary cutter designed to clear
overgrown roadways, for light land management, and property
maintenance.
•
The LS-3 will easily cut up to 2-3” diameter limbs, brush, saplings,
and underbrush. The Lane Shark has 11 positions that allow it to cut
vertically, O
ff
set, directly in front (level), or 25°, 35°, & 45° in the vertical
and o
ff
set positions.
•
The Lane Shark LS-3 attaches to the front of any FEL tractor with a
SSQA or JD Hook & Pin-Style attachment system. There are adapters
available to
fi
t most other applications sold separately.
•
The Lane Shark LS-3 weighs just under 320 lbs.
•
In order for the Lane Shark brush cutter to operate to full potential, the
tractor must have a hydraulic
fl
ow rate of at least 5 GPM.
•
To run the Lane Shark, you must have rear remotes or third function.
ONLY Pressure comes from the remote, and return must be to the
sump.
(CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
•
When purchasing the Lane Shark brush cutter, you will receive a
unit equipped with #8 ORB (O-ring Boss) inlets. When using ORB, a
minimum inside diameter of 3/8” is required.
•
NOT COMPATIBLE WITH DIVERTER VALVES
