(850) 610-2870
www.lanesharkusa.com
14
Lane Shark LS-3
COMPONENTS
(
06
)
SWING ARM
SALS3000002022A
The Swing Arm (06) is the main connection between the Backplate
(02) and the Cutting Deck (01). This connection is made by attaching
the Swing Arm (06) to the Backplate (02) via the Main Pivot Point (07)
and attaching the Cutting Deck (01) to the Swing Arm (06) via the Main
Adjustment Hinge (05). This allows the LS-3 Cutting Deck (01) to move
180 degrees from directly in front of the tractor to the vertical and o
ff
set
positions while staying attached to the loader. Once in any of the positions
the Swing Arm (06) is supported by the Main Support Arm (10) to keep the
LS-3’s structure stable while in transition or operation. Extending forward
roughly 24 inches from the Swing Arm (06) is the Main Adjustment Hinge
(05). This allows the Cutting Deck (01) to move 180 degrees around the
Swing Arm (06) from the horizontal cutting positions to the vertical cutting
positions. (Facing the unit) There are two Lock Brackets (09) attached to
the left and right sides of the Swing Arm (06), the Lock Brackets (09) allow
the Swing Arm (06) to lock to the Cutting Deck (01) via the Tower Locks (13)
when in the home position.
ABOVE
FRONT
FACING LEFT
FACING RIGHT
