Landoll BRILLION TURFMAKER II SL, Operator'S Manual

Page: 27 / 100

ASSEMBLY
9K998 2-11
5. Apply anti-seize to Spindles and insert a Hub and
Spindle Assemblies into each Wheel Arm. Secure in
Spindles farthest hole from the Hub with 1/2-13 x 3
Bolts and Locknuts.
See Figure 2-15.
Figure 2-15: Hub and Spindle
Tire and Wheel Installation

WARNING
NOTE
All tire/wheel assemblies are mounted with the valve
stem facing outward from Hub and Spindle.
Torque will drop after the first 10 hours of operation.
Check the Wheel Bolts for proper torque after this interval
and re-tighten them.
1. 12Ft Seeder uses 11L x 15, 12Ply Implement Rib
Rating Tires and should be inflated to 52 PSI.
2. Install a Tire and Wheel Assembly onto each Hub
with 1/2-20 x 1 Wheel Bolts and tighten Wheel Bolts
to 50 ft-lbs using the sequence in
See Figure 2-16.
Then tighten to a full torque of 80-85 ft-lbs.
3.
Figure 2-16: Tightening Sequence
+XEDQG6SLQGOH
$VVHPEO\
/RFNQXW
%ROW
[
:KHHO$UP
:KHHO%ROW
[
7LUHDQG:KHHO
$VVHPEO\
2S:KO$UP.+XE7LUH
Use a torque wrench to assure proper torque.
Insufficient torque can cause stud breakage and
damage the wheel pilots. Over torque can stress
the Bolts and strip the threads.