Landoll BRILLION TURFMAKER II SL, Operator'S Manual

Page: 47 / 100

ASSEMBLY
9K998 2-31
Rear Seed Box Installation prior
to 01/2020 – Optional
1. Engage Parking Pin on 3Pt Models. Lower Seeder
and empty Seed Boxes
2. Disconnect Acre Meter and Warning Lamps
3. 8 and 10Ft Models, remove RH and LH Light
Brackets.
4. 12Ft Models, remove Turnbuckles from Seed Box
RH Support, Center Bracket and LH Mounting Plate.
5. On the back of the Transmission by the Calibration
Wrenches, loosen the Transmission #40 Drive Chain
Idler Sprocket Axle Bolt and Clevis Drawbolt Locknut
to loosen Drive Chain tension.
See Figure 2-44.
Figure 2-44: Loosen Idler Sprocket
6. Remove Seed Shaft Seed Rate Adjusting Nut. Do
Not loosen 1/2-13 Locknuts at the end of the Seed
Rate Adjusting Screw.
See Figure 2-45.
Figure 2-45: Front Box Seed Rate Adjuster
7. Remove Seed Rate Adjuster Bearing Carrier Plate
with Bearing still Assembled to it, from the Seed Box
RH Support and Seed Rate Adjusting Screw.
8. At the center of the Seeder where the RH and LH
Hex Seed Shafts come together, remove Seed Shaft
Coupling and unscrew RH Seed Shaft from LH Seed
Shaft.
See Figure 2-46.
Figure 2-46: Front Box Seed Shaft Coupler
9. Support RH and LH Seed Boxes by using the hole in
the Dividers inside the Seed Box. Remove Seed Box
RH Support, RH Seed Box and Seed Box Center
Bracket.
10. Remove Rear Deflectors. Turn Rear Deflectors
around so that the lip angles rearward. Re-install
Rear Deflectors.
See Figure 2-47.
,GOHU6SURFNHW
$[OH%ROW
&OHYLV'UDZEROW
/RFNQXW
&DOLEUDWLRQ
:UHQFKHV
&OHYLV
'UDZEROW
7UDQVPLVVLRQ
'2127
/RRVHQRU$GMXVW
/RFNQXW
'2127
/RRVHQRU$GMXVW
/RFNQXW
6HHG5DWH
$GMXVWLQJ1XW
1XW
$GMXVWLQJ
6FUHZ
6HHG6KDIW
%HDULQJ
5+
6HHG6KDIW
6HHG6KDIW
&DOI
/RFNQXW
)ODQJH
%ROW
[
6HHG6KDIW
&DOI
/+
6HHG6KDIW
6/2S6HHG6KDIW&RXSOHU