Landoll Brillion 3631-25, Operator'S Manual

Page: 23 / 138

ASSEMBLY
F-979-0219 2-7
Tire and Wheel Installation

WARNING
NOTE
All tire/wheel assemblies are mounted with the valve
stem facing outward from Hub and Spindle.
1. Remove the eight 5/8-18 Wheel Nuts from the Hub.
Install the Tire and Wheel Assembly onto the hub.
The Pulvi-Mulcher uses 320/70R15 tires and should
be inflated to 70 PSI.
Figure 2-8.
2. Re-Install the 5/8-18 Wheel Nuts and tighten to 50
ft-lbs using the sequence in
Figure 2-7 . Then tighten
to full torque of 130-150 ft-lbs.
Figure 2-7: Stud Tightening Sequence
NOTE
Torque will drop after the first 10 hours of operation.
Check the nuts for proper torque after this interval and
re-tighten them.
Figure 2-8: Tire Installation
Use a torque wrench to assure proper torque.
Insufficient torque can cause stud breakage and
damage the wheel pilots. Over torque can stress
the studs and strip the threads.
%2/7
7LUHDQG:KHHO$VVHPEO\
2S7LUH
:KHHO1XWV
+XE