Landoll Brillion 3631-25, Operator'S Manual, Page: 81 / 138

ASSEMBLY
F-979-0219 2-65
Wing Shank Installation
Engage Transport Locks
It is easier to bolt the points to the shank before mounting
them on the machine.
NOTE
If machine requires Optional Front Scrapers: Lower the
machine on a level surface and install scrapers before
installing shanks. See scraper section on
page 2-74 .
Front Scraper installation is similar to rear. It is easier to
install shanks while machine is raised.
Assemble Points to Shanks as shown in Figure 2-61 .
Mount the Shanks to the Wing Tooth Control Tubes using
two 1/2-13 x 5 Bolts and Locknut.
See Figures 2-54 and
2-55 for Left and Right hand Shank Mounting
Dimensions.
Figure 2-61: Wing Shank Installation
3630 OpShankPoints
3630 OpShankPoints
Bolt,1/2-13 x 5
Locknut,1/2-13
Lock Washer,
7/16
Nut,7/16-14
2” Reversible
Point
Plow Bolt
7/16-14 x 1-3/4
Flat Washer,7/16
Lock Washer,7/16