Landoll 850 FINISHOLL, Operator'S Manual

Page: 53 / 74

3-13 WARNING LIGHTS INSTALLATION
3-13.1 Assemble lights to the light bracket us-
ing 1/4 X 1-3/4 cap screws and nuts. Insure
the wires are in the groove in the base of the
light toward the mounting surface on the
bracket. Assemble one light for left side and
one for right side. The red light should be to
the rear with the amber light being the outer
most light.
3-13.2 Install the assembled lights on the out-
side of the frame just forward of the rear
hinge using bar and 1/2-13 x 3-1/4 and 3-1/2
cap screws (4-1/2" long screws used on 30’-
35’ models) and nuts. (See Figure 3-20).
IMPORTANT
MAKE SURE LIGHTS ARE POSITIONED FOR
MAXIMUM VISIBILITY FROM THE REAR.
3-13.3 Install the rear wiring harness between
the lights. Note: 30" extensions are re-
quired on each side on 33’ and 35’ mod-
els.
3-13.4 Install the main harness by starting at
the hitch and routing the harness through the
hose loops to the extension harness.
3-13.5 Insure the harnesses are clear of any
moving parts and secure the harnesses with
tie wraps provided.
3-21