Gyr
Chapter 4 - Concentrator Installation
Series IV Concentrator U and I Guide
98-1031 Rev AA
29
Adding Drip Loops to Cables
For any cables in an assembly, allow some slack to rest below metal parts. The slack is called a “drip
loop.” With a drip loop, water from rain and condensation drips from the cable without damaging
associated mechanical equipment
.
Figure 4 - 1. Cable with drip loop
Kit Part Numbers
Different kinds of installs may require different mounting and install kits. The following table
contains a list of part numbers (PN) by install type. This document details each kit in the appropriate
install description.
For information about installation types not listed here, contact Gyr Customer Operations
via
ëçäìíáçåëìééçêíKå~]ä~åÇáëÖóêKÅçã
.
Table 4-2. Mounting and Programming Kits
Kit Number
Wood Pole Install
Light Pole
Horizontal
Mount Install
Metal Pole
Vertical Mount
Install
Mounting Kit
PN 45-1091
x
Mounting Kit
PN 45-1050, 8”
rod
x
Mounting Kit
PN: 45-1049
x
Mounting Kit
PN: 45-1055, 12”
rod
x
Programming Kit
PN 45-1046
x
x
x
