Landice M1, Service Manual

Page: 8 / 26

1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM
Measuring AC & DC Amperage
AC Amperage must be perform on the BROWN WIRE of the linecord.
DC Amperage must be perform on the RED WIRE from the drive motor.
While straddling the belt, start the treadmill and bring the speed up to 3.0 mph at 0%
elevation. Once the treadmill is up to speed start walking on the treadmill while looking at the
voltmeter. The voltmeter will start giving you an amperage reading. The average highest
reading possible equals your amperage reading. The more friction, the hotter the treadbelt
will become which will increase your amperage reading.
AC Amperage DC Amperage Treadbelt Condition
2.0-4.0 AC Amps 4.5-6.0 DC Amps Good
5.0-7.0 AC Amps 7.0-9.0 DC Amps Normal
7.0-10.0 AC Amps 9.0-12.0 DC Amps Replace
Adc Indicates DC Amperage
Aac Indicates AC Amperage
AMP METER CLAMP
USE THE CHART BELOW TO DETERMINE THE TREADBELT CONDITION
PERFORMING AMPERAGE INSTRUCTIONS