Landice M1, Service Manual

Page: 5 / 26

1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM
Electrical Requirements
Please Note: All M1 Treadmills only comes as a 110v unit
Landice requires that a dedicated circuit needs to be wire for each piece of Landice equipment.
For optimal performance,
DO NOT plug equipment into an AFCI or GFI circuit breaker/outlet.
Adapters or extension cords is not recommended.
Treadmills marked 120 VAC recommended for use with a grounding plug in a nominal 120-volt
circuit. Ensure the treadmill power cord connected to an outlet having the same phase configuration
as the power cord plug.
Treadmills marked 200-250 VAC recommended for use on a circuit having a nominal rating
greater than 120V, and are factory-equipped with a specific power cord and plug to permit
connection to a proper electrical circuit. Ensure the treadmill power cord connected to an outlet
having the same configuration as the plug. Landice recommends, not using adapters with 200–250
VAC treadmills.
If any treadmill needs configuration for use on a different type of electrical circuit, we will require
that an authorized service provider make the proper configurations to meet the electrical
requirements.
For 220v & 110v units using 3-phase voltage:
•
Each treadmill must have its own circuit breaker and be run on the same phase; same power
leg.
•
If 220v power is required, all treadmills must run on the same two phases (power legs) and on
their own circuit breakers.
110v Electrical Requirements
Plug NEMA Style 5-20P
Receptacle NEMA Style 5-20R
220v Electrical Requirements
Plug NEMA Style 6-15P
Receptacle NEMA Style 6-15R