![Landice Cardio Owner'S Manual Download Page 26](http://html1.mh-extra.com/html/landice/cardio/cardio_owners-manual_673644026.webp)
Running User-Defined Heart Rate Monitoring Programs
The User-Defined Heart Rate Monitoring (HRC) programs are designed to allow you to set the target heart rate for up to 20
program segments.
To customize a User-Defined HRC Program during your workout, adjust your Target Heart Rate using the center arrow keys
in the Heart Rate Status screen. Any Target Heart Rate changes you make during your workout will be saved in that
User-Defined HRC Program.
If you want to edit your User-Defined HRC Program before your workout, follow these steps:
SELECT HRC PROGRAM
To select an HRC program to edit, press the
HRC
button. To scroll through the
programs, either continue to press the HRC button or the center Arrow Keys.
Select one of the 2 User-Defined HRC Programs to edit by pressing
ENTER
.
SELECT MAXIMUM SPEED
The display will prompt you to set a Max Speed using the numeric keypad or
center arrow keys. Select your speed and press
ENTER
or wait 3 seconds.
SET MAXIMUM INCLINE
The display will prompt you to set a Max Incline using the numeric keypad or
center arrow keys. Select your incline and press
ENTER
or wait 3 seconds.
The display will read, “PRESS START TO BEGIN OR ENTER TO EDIT”. Press
START
to run the program displayed in the
program preview or
ENTER
to begin Edit Mode and make changes.
EDIT THE SEGMENTS
The first display in EDIT MODE requires a change of the time for segment 1
(area with white background). Use the Numeric Keypad to change the value and
press
ENTER.
Pressing ENTER will toggle between Target Heart Rate and time
values for that segment. Continue to program subsequent segments by using the
center arrow keys to move from segment to segment.
CREATING A PROGRAM WITH LESS THAN 20 SEGMENTS
If you do not want a program to have the full 20 segments, once you are satisfied
with your last segment, create an additional segment with “0” in the Time field.
The time will read END. Your User-Defined HRC Program will end upon the
completion of the previous segment.
EXITING EDIT MODE
Once you have completed editing your User-Defined HRC Program, you can start the program by pressing
START
. If you
attempt to advance the cursor past the 20th segment, you will be prompted with “PRESS START TO BEGIN OR ENTER TO
EDIT” screen.
You can also exit Edit Mode by pressing
Manual Mode
,
HRC
,
or Programs
at any time. Any changes you make during Edit
Mode are permanently saved in that User-Defined HRC Program.
21