Landi S160, User Manual

Page: 4 / 9

4
1
、
Product Summary
Product Features---------------------------------------------------------------------------------
S160 is a new gen PINPAD developed by LANDI itself. It is in compact and novel design, and equipped with privacy
shield to secure card holder
’
s privacy.
Security Notices ------------------------------------------------------------------------------------------
Dangerous
 For device installing and connecting, strictly abide by relative instruction regulated in the guide. S160
is power supplied by the host (normally by the POS or PC). And the host should be connected onto
firm power socket, to assure that the earth wire of the socket is connected with ground; and the
socket is better not to share the same circuit with those facilities often switch on and off, such as
printer, air conditioner.
 It should be prohibited that any liquid is fallen onto, or any conductive substances (eg. pin, tack, wire
etc) are precipitated into this electrical device; otherwise short circuit may occur to damage the
device.
 Do not press the device or place anything onto the device.
 Do not vibrate, shake or knock the device.
 When failure occurs, please immediately switch off the power and stop using. Please do contact our
after-service department in time and do not privately open the product for maintenance
 Li-ion battery is equipped inside the device, for any battery change, only specified model can be
used. Wrong model may cause explosion. Please do contact our after-service department for help in
case of battery change.
 Stop using the device immediately in case of power wire damaged, and notice related after-sales for
help in time.

When the PIN Pad is tampered (eg. device casing is opened by attacker), the sensitive information
stored inside POS will be all erased. Therefore, to avoid such trouble, please do not open the casing
without permission.

If the PIN Pad is tampered (eg. device casing is opened by attacker), there will be obvious tamper
prompt displayed along with alarming,; in this case, please contact LANDI customer service for help.
2
、
Usage Instructions
2.1 Power Socket Interfaces
1)USB Interface: The USB interface of the terminal can be used for communication and for power supply.