WATER JET SYSTEM
INSTRUCTION MANUAL AND PARTS LIST
3
WATER JET SYSTEM Manual • #96-617 • Rev 12/03
INTRODUCTION
The Water Jet is designed to attach to a pressure washer
which causes rotation of two high pressure nozzles which
will contain the spray as well as determine the size of
the swath when cleaning surfaces such as parking lots,
driveways and sidewalks.
It also has an attached spray gun and hose for isolated
cleaning areas. The height adjustment knob allows for
cleaning variations by easily raising or lowering the ro-
tating pressure spray.
Owner/User Responsibility:
The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this Water Jet. Warning information should
be emphasized and understood. If the operator is not
fluent in English, the manufacturer’s instructions and
warnings shall be read to and discussed with the opera-
tor in the operator’s native language by the purchaser/
owner, making sure that the operator comprehends its
contents.
Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.
This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.
When ordering parts, please specify model and
serial number.
IMPORTANT SAFETY
INFORMATION
CAUTION: To reduce the risk of in-
jury, read operating instructions
carefully before using.
1. Read the owner’s manual thor-
oughly. Failure to follow instruc-
tions could cause malfunction
of the machine and result in
death, serious bodily injury
and/or property damage.
WARNING: High pressure stream
of fluid that this equipment can
produce can pierce skin and its un-
derlying tissues, leading to serious
injury.
2. High pressure developed by
these machines will cause per-
sonal injury or equipment dam-
age. Use caution when operat-
ing. Do not direct discharge
stream at people or animals or severe injury or death
will result.
3. Never make adjustments on machine while it is in
operation.
4. Eye safety devices and foot protection must be worn
when using this equipment.
5. The best insurance against an accident is precau-
tion and knowledge of the machine.
6. Never point the Water Jet wand at any part of your
body or at anyone standing within 10 feet as serious
injury could occur.
WARNING: High pressure spray can
cause paint chips or other particles
to become airborne and fly at high
speeds.
7. Safety clothing and protective
eye covering must be worn.
8. Water Jet assembly comes
equipped with a #6 nozzle in the
spray gun and two #3 nozzles in the rotating swivel.
Check your machine nozzle size before using.
9. We will not be liable for any alterations made to our
standard machines, or the application of any com-
ponents not purchased from us.
10. Pressure must NOT exceed 4,000 PSI. Tempera-
ture must NOT exceed 200°F. Flow rate must NOT
exceed 6 GPM.
11. To protect from freezing, squeeze trigger on spray
gun and lower the hose to allow water to drain. Flow
rate must NOT exceed 6 GPM.
GENERAL OPERATING
TECHNIQUES
1. Disconnect pressure washer spray gun from high
pressure hose. These items are not included, but
are provided with the soon to be attached pressure
washer.
2. Attach the female nipple, supplied with the Water Jet,
to the pressure washer high pressure hose.
NOTE: We recommend using no mar hose to pre-
vent black marks from appearing on the clean-
ing surface.
3. Couple the pressure washer high pressure hose to
the Water Jet.
4. Inspect your pressure washer nozzle size. The Wa-
ter Jet surface cleaner comes with two #3 nozzles.
If your pressure washer requires a nozzle larger than
a #6, consult with your local dealer.
WARNING
HIGH PRESSURE
STREAM CAN
PIERCE SKIN
AND TISSUE
WARNING
USE PROTECTIVE
CLOTHING WHEN
OPERATING.
READ OPERATOR’S
MANUAL
THOROUGHLY
PRIOR TO USE
WARNING
CAUTION
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
