Landa SLT/SL
X Kubota Diesel Operator Manual • 9.807-540.0 • Rev. 6/13
OPERA
TOR’S MANU
AL
PRESSURE W
ASHER
8
98075400-5
98075400-6
98075400-8
ASSEMBLY INSTRUCTIONS
STEP 1: Attach a 5/8" water supply
hose to inlet connector. Minimum
flow should be 10 GPM depending
on model of machine.
STEP 3: Attach variable pressure
control wand to spray gun using
teflon tape on threads to prevent
leakage.
STEP 7: Check oil level by using
supplied dip-stick. Use SAE 30W
non-detergent only.
STEP 2: Attach high pressure hose
to discharge nipple using quick cou-
pler. Lock coupler securely by pull-
ing back coupler collar, inserting
onto discharge nipple and pushing
collar forward until secure.
STEP 8: Fill fuel oil tank. Do not
confuse gasoline and fuel oil tanks.
Keep proper fuel in proper tank.
STEP 5: Before installing nozzle, turn
on water supply and run machine
allowing water to flush through the
system until clear. Pull the spring-
loaded collar of the wand coupler collar
back to insert your choice of pressure
nozzle.
CAUTION: Never replace
nozzles without engaging the safety
latch on the spray gun trigger.
STEP 9: Install proper battery
making sure that the red cable is
attached to the positive terminal.
Use a 12V group 24 style battery.
98075400-3
Garden
Hose
Water
Inlet
98075400-4
High
Pressure
Hose
Discharge
Nipple
Trigger
Gun
98075400-7
Pressure
Nozzle
98075400-9
Dipstick
98075400-10
Collar
Wand
Safety Latch
STEP 4: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
High
Pressure
Hose
Spray Gun
STEP 6: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
Coupler
Collar
Pressure
Nozzle
Oil
Tank
Coupler
Collar
98075400-11
Summary of Contents for SLT6-32624E
Page 23: ......
Page 24: ...Form 9 807 540 0 Revised 6 13 Printed in U S A...