![background image](http://html1.mh-extra.com/html/land-pride/spl1060/spl1060_operators-manual_3538341010.webp)
Section 1: Options & Accessory Set-up
SPL1060, SPL1072, & SPL1084 Snow Pusher 303-451M
11/7/18
6
Section 1: Options & Accessory Set-up
Dealer Preparations
Ensure that the intended tractor conforms to the
requirements stated under the heading
DANGER
!
To avoid serious injury or death:
•
Keep clear while lifting the Snow Pusher from the crate.
The Snow Pusher is back heavy and can flip suddenly.
•
The Snow Pusher is back heavy and can tip over backward
once unhooked. Always unhook unit on level ground with
support blocks under the skid shoes at the back to tip the
unit forward. Never unhook unit with back of unit facing
downhill.
1.
The Snow Pusher is shipped on its back. Cut corner
posts of shipping crate and remove top frame.
2. Attach lifting chains to slots in the side panels.
3. Stabilize unit against flipping by attaching additional
chains to the holes at the front of the side panels.
4. Using a hoist, fork lift, or other lifting device, slowly lift
Snow Pusher until it has rotated upright.
5. Lower Snow Pusher until skid shoes are resting on
support blocks at the back of the unit and on the
ground at the front of the unit to make the unit tip
slightly forward.
Accessories are easier to attach after hooking-up Snow
Pusher to a tractor front loader. Refer to
Tractor Requirements
The Snow Pusher is designed to attach to tractor loaders
equipped with a universal quick-attach hitch. The
following requirements must be met:
Front loader hitch type . . . . . . . Universal quick-attach
Horsepower range . . . . . . . . . . . . . . . . . . . . 20-45 hp
Maximum tractor weight . . . . . . . . . . . . . . . . 3,000 lbs
Maximum tractor lift capacity at pivot pins . . 1,200 lbs
WARNING
!
To avoid serious injury or death:
•
Lightweight power machines may need weight added to the
•
Power machines outside the listed horsepower range must
Torque Requirements
Refer to
“Torque Values Chart”
on page 22 to for
correct torque values when tightening hardware.
Dealer Preparations
Figure 1-1
Support Block
Lifting Slots
Attach 2 lift chains to the front of the side plate
to help keep unit from flipping forward suddenly
while lifting the unit to its upright position.
Support Block
39891