Important Safety Information
SPL1060, SPL1072, & SPL1084 Snow Pusher 303-451M
11/7/18
4
838-293C
Warning: Read & Understand Manual
Safety Labels
Your Snow Pusher comes equipped with all safety labels in
place. They are designed to help you safely operate your
attachment. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Refer to this section for proper label placement. Replace all
damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer, visit
our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified
838-112C
Danger: Pinching Hazard (2 places)
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
Clean surface area where label is to be placed.
b.
Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
d.
Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
39885
39885
39885
858-215C
Danger: Roll Over Crushing Hazard
Important Safety Information
