Section 4: Operating Instructions
SBD3596 & SBD35108 Snow Blowers 370-347M
4/9/21
30
Beware of obstacles near the tractor while making turns
or backing up removing snow. Never swing front of tractor
or tractor mounted front loader into fire hydrants, mail
boxes, buildings, vehicles, fences, trees, or other
standing obstacles. Shift to a lower gear and travel very
slow when in a tight situation to allow time to react and
stop the tractor before hitting an obstacle.
Once you have reached end of travel, stop tractor, raise
Snow Blower up, and travel forward to the front of your
work to make another run at blowing snow. It is not
necessary to disengage power take-off while traveling
forward if Snow Blower is raised to a height that does not
exceed driveline limits. For explanation of driveline limits,
see
“Check Driveline Interference”
Once at the front, back Snow Blower up to your next
starting point, lower unit down onto its skid shoes or wear
bars until all pressure is off the 3-point arms, engage
power take-off, and begin traveling blowing snow.
With a little practice you will be pleased with what you
and your Land Pride Snow Blower can do. Whether you
are done blowing snow, need to take a break, or just need
to make a few adjustments to the Snow Blower,
remember to always do the following:
•
Reduce tractor’s engine rpm
•
Disengage power take-off
•
Stop on level ground and set tractor park brake
•
Turn off the engine and remove the key
•
Stay on the tractor until the Snow Blower augers have
come to a complete stop.
