Introduction
SBD3596 & SBD35108 Snow Blowers 370-347M
4/9/21
10
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Snow Blower have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Snow
Blower. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
35711
Right Side
Left Side
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Snow Blower has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this machine.
Application
The SBD3596 and SBD35108 Snow Blowers are
designed and built by Land Pride for commercial use.
They feature two stacked augers capable of removing
snow 40" (102 cm) high from parking lots, feed lots, or
any other place with large drifts that need to be accessed
by vehicles, other equipment, and animals.
The SBD3596 with its 8 ft. (2.44 m) width attaches to
tractors ranging from 85-135 hp (63-93 kW) with 540
power take-off speed. The SBD35108 / SBDM35108 with
their 9 ft. (2.74 m) width attaches to tractors ranging from
120 to 180 hp (90-134 kW) with 540 or 1000 power take-
off speed. This SBD35 Series features a Cat. 5 driveline
with Cat ll or Cat. lll hitches and are Quick Hitch
adaptable.
The grader blade and adjustable skid shoes increase the
life of the unit. The hydraulic rotational discharge chute
allows the operator to blow snow in any direction up to
220
o
with a deflector on the end of the chute to control the
distance snow is blown from the unit.
See
“Specifications & Capacities”
on page 38 and
“Features & Benefits”
on page 40 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
Terminology
See Figure 1:
“Right” or “Left” as used in this manual is
determined by facing in the direction the machine will
operate while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
