Section 4: Maintenance & Lubrication
RTR2570 Rotary Tillers 311-251M
8/30/22
27
Bearing on Left End of Rotor Shaft
Grease bearing on right end of tines until grease starts to
purge from the relief hole in the bearing mount casting on
the inside of the tiller end plate.
Type of grease = Multi-Purpose
Quantity = Coat Generously
33050
33050
14618
14759
8
Hours
Driveline Profiles
Disconnect driveline from the tractor and slide apart.
Clean and coat the inner tube of the driveline with a light
film of grease and then reassemble.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Driveline U-Joints
Add grease to the driveline u
-
joint every 8 hours of
operation.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Driveline Shield Bearings
Add grease to the driveline shields every 8 hours of
operation.
Type of Lubrication: Multi-Purpose
Quantity = 6 pumps
8
Hours
8
Hours
20
Hours
Lubrication Points
50
Hrs
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours at which
lubrication is required
Lubrication
Legend
