Land Pride RTR2570, Operator'S Manual

Page: 23 / 38

Section 2: Operating
Table of Contents
RTR2570 Rotary Tillers 311-251M 8/30/22
19
Section 2: Operating
Operating Checklist
Hazard control and accident prevention are dependent
upon the awareness, concern, prudence, and proper
training involved in the operation, transport, storage, and
maintenance of the Rotary Tiller. Therefore, it is
absolutely essential that no one operates the Rotary
Tiller without first having read, fully understood, and
become totally familiar with the Operator’s Manual. Make
sure the operator has paid particular attention to:
•
Important Safety Information , page 1
•
Section 1: Assembly & Set-up,
page 10
•
Section 3: Adjustments , page 22
•
Section 2: Operating
, page 19
•
Section 4: Maintenance & Lubrication , page 23
Inspections
Perform the following inspections before using your
Rotary tiller with tiller attached to a tractor, power take-off
disengaged and completely stopped.
Safety Information
DANGER
!
To prevent serious injury or death:
•
Do not engage power take-off while connecting or
disconnecting the driveline, or while someone is standing
near the driveline. A person’s body and/or clothing can
become entangled in the driveline.
Operating Checklist

Check Ref.
Inspect tractor safety equipment to make sure
it is in good working condition.
Tractor
Manual
Check all guards and shields to make certain they are in
good working condition, in place, and secured.
Carefully raise and lower implement to ensure drawbar,
tires, etc. do not contact tiller frame or driveline.
Check driveline. Make sure it is secured at
both ends. Refer to “Driveline Hook-up”.
Page 15
Check drive chain tension.
Refer to “Drive Chain”.
Page 22
Check tiller depth setting.
Refer to “Skid Shoe”.
Page 22
Check driveline slip clutch to make sure disks
will slip. Refer to “Driveline Maintenance”
Page 24
Check for worn, bent, broken, loose, and/or
missing tines. Refer to “Tine Replacement”
Page 23
Grease driveline shaft and all other grease
fittings Refer to “Lubrication Points”.
Page 27
Check oil level in gearbox. Make sure all plugs
have been replaced when completed.
Refer to “Gearbox Lubrication”.
Page 28
Check oil level in chaincase. Make sure all
plugs have been replaced when completed.
Refer to “Chaincase Lubrication”.
Page 28
Check tiller initially and periodically for loose
bolts and pins. Refer to “Torque Values Chart”.
Page 32
•
Keep yourself and all others away from rotating tines and
drive train. Always disengage power take-off and lockout
power source before making adjustments or servicing the
tiller. A person’s body, hair, or clothing can become
entangled in rotating components causing serious bodily
injury or death.
•
Keep away from rotating hex drive shaft located between
gearbox and drive end of tiller. A person can become
entangled in the shaft.
•
Make all 3-point hydraulic adjustments from the tractor
seat. Never make hydraulic adjustments while standing
behind the tractor.
•
All guards and shields must be installed and in good
working condition while operating the implement.
•
Tine impact on objects can throw projectiles resulting in
bodily injury or death. Do not point discharge toward
people, animals, or buildings and keep people and animals
away from tiller during operation.
•
Always disengage power take-off immediately after lifting
tiller above ground level. Never operate tiller in the raised
position. The tiller can discharge objects at high speeds
resulting in injury or death.
•
Keep front rubber dirt deflector on reverse tine tillers in
place while operating the unit. Objects in a reverse tine
tiller can be thrown forward toward the operator.
•
Do not use a power take-off adapter. The adapter will
increase strain on the tractor’s power take-off shaft causing
possible damage to shaft and driveline. It will also defeat
the purpose of the tractor’s power take-off shield.
WARNING
!
To prevent serious injury or death:
•
Be careful when working areas where obstructions can be
hidden. Always mark potential hazards with a visible flag.
Travel slowly through high risk areas and be prepared to
stop immediately should implement make contact with a
solid object.
•
Do not till across steep inclines that are subject to rollover.
The action of the tines being forced down into the ground
can cause the tractor to roll-over resulting in serious injury
or death. Consult your tractor’s manual for acceptable
inclines the tractor is capable of traveling across.
•
Never carry riders on the implement or tractor. Riders can
obstruct the operator’s view, interfere with controls, be
pinched by moving components, become entangled in
rotating components, struck by objects, thrown about, fall
off and be run over, etc.
•
Allow only persons to operate this implement who have
fully read and comprehended this manual, and who have
been properly trained in the safe operation of this
implement. Serious injury or death can result from the
inability to read, understand, and follow instructions
provided in this manual.
•
Do not use implement as a man lift or work platform. It is
not properly designed or guarded for this use.