Land Pride RGR12 Series, Operator'S Manual

Page: 14 / 40

Section 1: Assembly and Set-up
Table of Contents
RGR12 & RGA12 Series Rotary Tillers 311-948M 1/7/19
10
RGR Front Deflector Assembly
Figure 1-2
If rubber deflector (#1) has a diamond pattern on
one side, install that side up.
70277
RGR12 Series Front Deflector
Refer to Figure 1-2:
1. Skip to “Rear Deflector Chain” below if your tiller is
the RGA12 Series.
2. Attach rubber deflector (#1) to tiller frame with
3/8
"
-16 x 1 1/4
"
GR5 hex bolts (#2), lock washers
(#3), and 1 1/2" fender washers (#4).
3. Tighten hex bolts (#2) to the correct torque.
NOTE: RGA12 Series tillers discharge out the rear
and therefore, do not require a front deflector.
NOTE: If rubber deflector (#1) has a diamond
pattern on one side, install that side up. Smooth side
down will help keep dirt from collecting on the
underside of the deflector.