background image

Table of Contents

© 

Copyright 2018 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this
product at the time of its publication, and may not reflect the product in the future. 

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

11/5/18

LR0548 and LR0560 Landscape Rakes 302-185M

Table of Contents

Important Safety Information   . . . . . . . . . . . . .  1

Safety at All Times   . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look for the Safety Alert Symbol  . . . . . . . . . . . . . . . 1
Safety Labels   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction   . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

Application   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using This Manual   . . . . . . . . . . . . . . . . . . . . . . . . . 5
Owner Assistance  . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Serial Number   . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Section 1:  Assembly & Set-up  . . . . . . . . . . . .  6

Tractor Requirements  . . . . . . . . . . . . . . . . . . . . . . . 6
Torque Requirements  . . . . . . . . . . . . . . . . . . . . . . . 6
Landscape Rakes  . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Parking Stand Assembly  . . . . . . . . . . . . . . . . . . . . . 6
Tractor Hook-Up  . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Leveling the Landscape Rake  . . . . . . . . . . . . . . . . . 7

Section 2: Optional Equipment Set-up  . . . . . .  8

LR05 Dual Gauge Wheel   . . . . . . . . . . . . . . . . . . . . 8

Gauge Wheel Assembly . . . . . . . . . . . . . . . . . . . . 8

Section 3: Operating Instructions . . . . . . . . .  10

Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . . 10
General Safety   . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Inspection After Hook-up . . . . . . . . . . . . . . . . . . . . 11
Check Equipment Clearances  . . . . . . . . . . . . . . . . 11
Transporting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Unhooking the Landscape Rake  . . . . . . . . . . . . . . 12
Operating Instructions  . . . . . . . . . . . . . . . . . . . . . . 12

Section 4: Adjustments  . . . . . . . . . . . . . . . . .  13

Safety Alerts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rake Angling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rake Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rake Tilt  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Gauge Wheels (Optional)  . . . . . . . . . . . . . . . . . . . 13

Section 5: Maintenance & Lubrication   . . . . . 14

Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Long-Term Storage  . . . . . . . . . . . . . . . . . . . . . . . . 14
Ordering Replacement Parts  . . . . . . . . . . . . . . . . . 14

Gauge Wheel  . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Rake Teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Section 6: Specifications & Capacities  . . . . . 16
Section 7: Features & Benefits   . . . . . . . . . . . 17
Section 8: Torque Values Chart  . . . . . . . . . . . 18
Section 9: Warranty   . . . . . . . . . . . . . . . . . . . . 19

Summary of Contents for LR0548

























Reviews: