background image

Introduction 

Table of Contents

LR0548 and LR0560 Landscape Rakes 302-185M

11/5/18

5

The parts on your Landscape Rake have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1 

Further Assistance

Your dealer wants you to be satisfied with your new 
Landscape Rake. If for any reason you do not understand 
any part of this manual or are not satisfied with the 
service received, the following actions are suggested:

1.

Discuss any problems you have with your implement 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

35322

Introduction

Land Pride welcomes you to the growing family of new 
product owners. This Landscape Rake has been 
designed with care and built by skilled workers using 
quality materials. Proper assembly, maintenance, and 
safe operating practices will help you get years of 
satisfactory use from this machine. 

Application

The LR05 Series Landscape Rakes are designed and 
built by Land Pride to perform final soil surface 
preparation and reshaping soil and/or aggregate profile. 

The LR05 Series rakes are offered in 4 ft. and 5 ft. 
working widths with Cat. 1 3-Point hitch for mounting to 
compact tractors in the 25 hp range. All sizes offer 
angling to meet specific finishing needs. 

An optional gauge wheel package is available to enable a 
more consistent finish over uneven or undulating terrain 

These Land Pride Landscape Rakes are perfectly suited 
for use by landscapers, contractors, and rental yards. 
They have applications at housing and road construction 
projects, golf courses, terracing sites, run-off control 
projects, and reforestation sights. 

See 

“Specifications & Capacities” 

on page 16 and 

“Features & Benefits”

 on page 17 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation.

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

Terminology

“Right” or “Left” as used in this manual is determined by 
facing forward in the direction the machine will operate 
while in use unless otherwise stated.

Definitions

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing.

NOTE:  

A special point of information that the 

operator should be aware of before continuing.

Summary of Contents for LR0548

























Reviews: