Kit Assembly Instructions
7
2/2/22
L02 Third Function Valve Kit Assembly Instructions Manual No. 380-366M
Securing & Connecting the Wire Harness
Figure 1-16
4. Continue routing power supply branch of the third
function wire harness down to the fuel tank stay (N).
Locating the Fuel Tank Stay
Figure 1-17
5. Install a push-mount style cable tie (#33) onto the
pre-existing corner hole on the fuel tank stay (N).
Refer to Figure 1-17 and Figure 1-18.
6. Secure the power supply branch to cable tie (#33) on
fuel tank stay (N).
U
D
R
L
BLACK
Deutsch connector
GREEN
Deutsch connector
Bottom
solenoid
76237
NOTE:
The fuel tank stay (N) is located under the
tractor’s right side panel, directly below the fuel tank.
76314
N
Fuel tank
Power supply branch
33
7.
Locate the tractor’s AUX power wire harness located
under the control panel’s right side and below the
ignition switch, then separate its connector from its
dust cap. Refer to Figure 1-18.
8. Continue routing power supply branch across the
fuel tank stay (N), and in front of spring (P).
9. Remove dust cap from connector at the end of the
power supply branch.
10. Connect the power supply branch to the tractor AUX
power wire harness. Refer to Figure 1-18.
Connecting to Tractor’s AUX Power Wire Harness
Figure 1-18
76127
Dust cap
76236
N
Power supply branch
33
Tractor AUX power wire
harness & connector
P