Kit Assembly Instructions
13
2/2/22
L02 Third Function Valve Kit Assembly Instructions Manual No. 380-366M
Checking Fuses
Refer to Figure 1-31 & Figure 1-32:
1. Properly shutdown tractor by referring to the detailed
procedures in the tractor Operator’s Manual.
2. Visually inspect the 5 amp in-line fuse, which can be
found on the third function wire harness under the
loader valve mount (A). See Figure 1-31.
a. If the fuse is not blown, proceed to step 3.
b. If the fuse is blown, check the third function wire
harness for a possible electrical shortage.
c. If no electrical shortage is found, replace the fuse,
then proceed to check the function of the Third
Function Valve Kit.
Checking the 5 Amp In-line Fuse
Figure 1-31
5 amp
in-line fuse
Third function
wire harness
76140
A
3. Remove and visually inspect the tractor AUX fuse
located under the left side of the control panel as
shown in Figure 1-32.
a. If the fuse is blown, replace the fuse, then
proceed to check the function of the Third
Function Valve Kit.
Checking the Tractor AUX Fuse
Figure 1-32
76141
Tractor AUX
fuse
