Land Pride DB26 Series Operator'S Manual Download Page 3 | Manualshive

Page: 3 / 60

background image

Table of Contents

©

Copyright 2019 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this
product at the time of its publication, and may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

5/24/19

DB2660 & DBM2660 Ditch Bank Rotary Cutter 316-317M

Table of Contents

Important Safety Information . . . . . . . . . . . . . 1

Safety at All Times   . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look For The Safety Alert Symbol   . . . . . . . . . . . . . 1
Safety Labels   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Application   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using This Manual   . . . . . . . . . . . . . . . . . . . . . . . . 13
Owner Assistance  . . . . . . . . . . . . . . . . . . . . . . . . . 13

Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Section 1: Assembly & Set-up . . . . . . . . . . . 14

Tractor Requirements  . . . . . . . . . . . . . . . . . . . . . . 14
Protective Equipment Requirements  . . . . . . . . . . . 14
Dealer Preparations   . . . . . . . . . . . . . . . . . . . . . . . 15
Unloading & Parking The Cutter  . . . . . . . . . . . . . . 15
Preparing For Tractor Hook-up  . . . . . . . . . . . . . . . 15

Fill Hydraulic Reservoir With Fluid . . . . . . . . . . . 15
Check Hose Loops . . . . . . . . . . . . . . . . . . . . . . . 15
Rotate Deck Down . . . . . . . . . . . . . . . . . . . . . . . 16

Tractor Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Prepare Cutter for Hook-up . . . . . . . . . . . . . . . . 18
3-Point Hook-up to Cat. ll Standard Hitch . . . . . 18

Upper Center Bushing Placement  . . . . . . . . . . . . . 19
Lower Hitch Pin Set-up For Cat. ll Quick Hitch   . . . 19
Lower Hitch Pin Set-up For Cat. lll Quick Hitch  . . . 19
Driveline Installation (Optional)  . . . . . . . . . . . . . . . 20
Driveline Hook-up (Optional)  . . . . . . . . . . . . . . . . . 20

Check Driveline Collapsible Length  . . . . . . . . . . 21
Check Driveline Maximum Length  . . . . . . . . . . . 22
Check Driveline Interference  . . . . . . . . . . . . . . . 22

Speed Increaser Hook-up (Optional) . . . . . . . . . . . 23
Purge Hydraulic Cylinders . . . . . . . . . . . . . . . . . . . 23

Section 2: Options & Accessories Set-up . . 24

Tailwheel (Optional)   . . . . . . . . . . . . . . . . . . . . . . . 24
Side Gauge Wheel (Optional)  . . . . . . . . . . . . . . . . 24
Weight Hanger Assembly (Optional)  . . . . . . . . . . . 24

Bolt-on Weight Hangers . . . . . . . . . . . . . . . . . . . 25

Optional Front Guard Assemblies . . . . . . . . . . . . . 26

Front Rubber Guard . . . . . . . . . . . . . . . . . . . . . . 26
Front Single or Double Chain Guard . . . . . . . . . 26

Optional Rear Guard Assemblies . . . . . . . . . . . . . 27

Rear Rubber Guard . . . . . . . . . . . . . . . . . . . . . . 27
Rear Single or Double Chain Guard . . . . . . . . . . 27
Slow Moving Vehicle Sign (Accessory) . . . . . . . 27

Protective Shield (Accessory) . . . . . . . . . . . . . . . . 28

Section 3: Hydraulic Plumbing . . . . . . . . . . . 29

Hydraulic Plumbing For Pump . . . . . . . . . . . . . . . . 29

Section 4: Adjustments . . . . . . . . . . . . . . . . . 30

Turtle/Rabbit Flow Control . . . . . . . . . . . . . . . . . . . 30
Deck Leveling Front to Back  . . . . . . . . . . . . . . . . . 30
Frame Leveling Left to Right  . . . . . . . . . . . . . . . . . 31
Angle Problems With Driveline   . . . . . . . . . . . . . . . 31
Cutting Height Adjustment . . . . . . . . . . . . . . . . . . . 32

Cutting Height Without Gauge Wheel . . . . . . . . . 32
Cutting Height With Side Gauge Wheel . . . . . . . 32
Cutting Height With Rear Gauge Wheel . . . . . . . 33

Section 5: Operating Procedures . . . . . . . . . 34

Startup Checklist  . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . 34
Tractor Shut Down Procedure  . . . . . . . . . . . . . . . . 35
Inspection of Tractor & Cutter  . . . . . . . . . . . . . . . . 35
Blade Operation Inspection  . . . . . . . . . . . . . . . . . . 36
Hook-up Transport Safety Chain  . . . . . . . . . . . . . . 37
Unhook Transport Safety Chain   . . . . . . . . . . . . . . 37
Transporting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Blade Engagement & Disengagement . . . . . . . . . . 38
Field Set-up & Operation  . . . . . . . . . . . . . . . . . . . . 39
Unhook Ditch Bank Cutter  . . . . . . . . . . . . . . . . . . . 40

Initial Preparation  . . . . . . . . . . . . . . . . . . . . . . . . 40
Unhook Hydraulic Hoses   . . . . . . . . . . . . . . . . . . 40
Unhook Driveline Option   . . . . . . . . . . . . . . . . . . 40
Unhook Speed Increaser/Pump Option   . . . . . . . 40
Unhook 3-Point Hitch Option   . . . . . . . . . . . . . . . 40
Unhook Quick Hitch Option   . . . . . . . . . . . . . . . . 40
Relocate SMV Sign   . . . . . . . . . . . . . . . . . . . . . . 40

Section 6: Maintenance & Lubrication . . . . . 41

General Maintenance Information  . . . . . . . . . . . . . 41
Hydraulic System   . . . . . . . . . . . . . . . . . . . . . . . . . 41
Skid Shoes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Cutter Blade Maintenance  . . . . . . . . . . . . . . . . . . . 42
Long Term Storage  . . . . . . . . . . . . . . . . . . . . . . . . 43
Lubrication Points  . . . . . . . . . . . . . . . . . . . . . . . . . 44

Section 7: Specifications & Capacities  . . . . . 50
Section 8: Features and Benefits   . . . . . . . . . 52
Section 9: Troubleshooting  . . . . . . . . . . . . . . 53
Section 10: Torque Values Chart . . . . . . . . . . 54
Section 11: Warranty   . . . . . . . . . . . . . . . . . . . 55

«
1
2
3
4
5
...
»

Summary of Contents for DB26 Series





























































Reviews:

No comments

Related manuals for DB26 Series

Brand: Raymarine Pages: 70

Brand: Harbor Freight Tools Pages: 4

Brand: Oberheim Pages: 40

SATURA SPOT LED PRO

Brand: Elation Pages: 41

Brand: Tapco Pages: 16

Brand: Zenbooth Pages: 40

Visium CytAssist

Brand: 10x Genomics Pages: 51

Chromium X Series

Brand: 10x Genomics Pages: 5

Brand: idiag Pages: 10

Brand: Bandit Pages: 136

Versaflo S Series

Brand: 3M Pages: 11

DBI Sala EXOFIT

Brand: 3M Pages: 32

Brand: 3M Pages: 8

Brand: Accurate Bio-Medical Technology Pages: 35

Brand: PANDROL Pages: 36

Brand: Badger Basket Pages: 7

Brand: Backyard Discovery Pages: 53

Brand: ZIGBEE Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands