Section 2: Options & Accessories Set-up
5/24/19
DB2660 & DBM2660 Ditch Bank Rotary Cutter 316-317M
26
Optional Front Guard Assemblies
DANGER
!
To avoid serious injury or death:
Rotary cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety guards is
required at all times when operating the Ditch Bank Cutter.
Front Rubber Guard
Refer to Figure 2-5:
Front Rubber Complete312-844A
1.
Install Front Rubber Guards (#5 & #6) as shown with
3/8"-16 x 1" GR5 carriage bolts (#3), front deflector
straps (#1 & #2), and hex whiz nuts (#4).
2.
Tighten all nuts to the correct torque.
Front Single or Double Chain Guard
Refer to Figure 2-6:
Front Chain Guard Complete312-845A
Front Double Chain Guard316-319A
1.
Install front chain guards (#1 & #4) as shown with
3/8"-16 x 1" GR5 carriage bolts (#2), and hex whiz
nuts (#3).
2.
Tighten all nuts to the correct torque.
Front Rubber Guard Installation
Figure 2-5
Front Chain Guard (Single or Double) Installation
Figure 2-6
37337
37338
