Land Pride DB26 Series, Operator'S Manual

Page: 31 / 60

Section 2: Options & Accessories Set-up
Table of Contents
5/24/19 DB2660 & DBM2660 Ditch Bank Rotary Cutter 316-317M
27
Optional Rear Guard Assemblies
DANGER
!
To avoid serious injury or death:
Do not operator cutter without a rear guard. Do not remove
rear guard unless it is replaced by an approved Land Pride
guard. Serious body injury or loss of life can result without an
attached rear guard.
Rear Rubber Guard
Refer to Figure 2-7:
Rear Rubber Guard . . . . . . . . . . . . . . . . . . . 316-336A
1. Install rear rubber guard (#5) with 3/8"-16 x 3 1/2"
GR5 carriage bolts (#3), deflector spacer (#1), and
3/8" whiz nuts (#4). Draw nuts up snug, do not tighten
at this time.
2. Attach both ends of rear rubber guard (#5) to the
deck as shown with 3/8"-16 x 1" GR5 carriage
bolts (#2), and hex whiz nuts (#4).
3. Tighten all hex whiz nuts (#4) to the correct torque.
Rear Single or Double Chain Guard
Refer to Figure 2-8:
Rear Chain Guard . . . . . . . . . . . . . . . . . . . . 316-335A
Rear Double Chain Guard. . . . . . . . . . . . . . 316-318A
1. Install rear chain guard (#5) with 3/8"-16 x 3 1/2" GR5
carriage bolts (#3), deflector spacers (#1), and
3/8" whiz nuts (#4). Draw nuts up snug, do not tighten
at this time.
2. Attach both ends of rear chain guard (#5) to the deck
as shown with 3/8"-16 x 1" GR5 carriage bolts (#2),
and hex whiz nuts (#4).
3. Tighten all hex whiz nuts (#4) to the correct torque.
Slow Moving Vehicle Sign (Accessory)
Refer to Figure 2-9:
Land Pride offers as an accessory the SMV sign with
attached mounting blade (#1) should your tractor not be
equipped with a removable SMV sign or should your SMV
sign not fit Land Pride’s SMV mounting socket (#4). Also,
mounting components (#2, #3, & #4) can be purchased
from your nearest Land Pride dealer should you want to
mount this SMV sign on another piece of equipment.
Item Part No. Description
1 316-362S SMV Sign
2 802-092C RHSNB 5/16-18X3/4 GR5
3 803-177C NUT HEX FLG TP LK 5/16-18ZNYCR
4 890-401C SMV MOUNTING SOCKET
Rear Rubber Guard Installation
Figure 2-7
Rear Chain Guard (Single or Double) Installation
Figure 2-8
Slow Moving Vehicle Sign
Figure 2-9
37339
37340
37431