5
3/18/10
Manual No. 313-473M
Assembly Instructions
Land Pride
Sprocket Installation
Refer to Figure 8:
1.
Install chain guard mount stake (#11) using
1/4"-20 x 5/8" GR5 hex flange serrated screws (#15),
lock washers (#22) and hex nuts (#17). Tighten nuts
to the correct torque.
2.
Install sling bracket (#10) using 5/8"-11 x 1 1/4" GR5
cap screws (#12) and hex flange lock nuts (#21).
Tighten nuts to the correct torque.
3.
Assembly 14/19T sprocket (#1) on end of agitator
shaft with 19T sprocket to the outside. Secure
sprocket with existing 1/4"-20 x 1 1/2" GR5 cap screw
(#14) and lock nut (#18). Tighten lock nut to the
correct torque.
4.
Assemble 16/43T double sprocket (#3) to front idler
plate (#9) with 5/8”-11 x 3” GR5 carriage bolt (#16),
square hole flat washer (#8), 7/8” long spacer (#6),
1/4" long spacer (#5), lock washer (#25) and hex
nut (#20) as shown.
5.
Assemble16/29T double sprocket (#2) to upper idler
plate (#4) with 5/8”-11 x 3” GR5 carriage bolt (#16),
square hole flat washer (#8), 7/8” long spacer (#6),
1/4" long spacer (#5), lock washer (#25) and hex
nut (#20) as shown.
NOTE: Draw all remaining nuts up snug. Do not
tighten. Sprockets & idler plates will require
readjusting during roller chain installation.
6.
Attach sprocket assemblies (#2 & #3) to All Purpose
Seeder using 3/8”-16 x 1 1/4” GR5 cap screws (#13),
flat
washers (#23), 3/8” long spacer (#7), lock
washer (#24) and hex nut (#19).
Small Seeds Hose Installation
Refer to Figure 13:
1.
Attach each small grass seed hose (#2) with
clamp (#3) to each of the small seeds cups (#4).
2.
Locate small grass seed hoses directly behind main
seed box seed cups and attach to seed drop plate
(#1) with hose holder clamps (#5).
Upper Chain Cover
Figure 9
26937
Sprocket Assembly
Figure 8
25925
