Land Pride 7000 Series, Operator'S Manual

Page: 20 / 38

Operating Instructions
Table of Contents
7000 Series 556-433M
9/16/20 16
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity, and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre - Start Checklist
Perform the following steps before transporting the
No-Till Drill to the field.

Carefully read “ Important Safety Information ” on
page 1.

Lubricate drill as indicated under “ Lubrication ” on
page 26.

Check all tires for proper inflation. See “ Tire
Inflation & Warranty ” on page 33.

Check all bolts, pins, and fasteners. Torque as
shown in “ Tire Inflation & Warranty ” on page 29.

Check drill for worn or damaged parts. Repair or
replace parts before going to the field.

Check hydraulic hoses, fittings, and cylinders for
leaks. Repair or replace before going to the field.

Perform all beginning - of - season and daily service
items under “ Maintenance ” on page 25.
High Pressure Fluid Hazard:
Relieve pressure before disconnecting hydraulic lines. Use a
piece of paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles
when working with hydraulic systems. Escaping fluid under
pressure can have sufficient pressure to penetrate the skin
causing serious injury. If an accident occurs, seek immediate
medical assistance from a physician familiar with this type of
injury.