LANCOM WLC
-
4006 - LANCOM WLC
-
4025
Chapter 4: Configuring the WLAN Controller
76
EN
address as 'Name' and as 'Password' and select the authentication method
'All'.
Alternatively, approved MAC addresses can be entered in WEBconfig under
Expert configuration
Setup
RADIUS
Server
Users
.
The MAC address is entered as 'User name'
and
as 'Password' in the
written form 'AABBCC-DDEEFF'.
4.3.10
Deactivating Access Points or permanently removing them
from the WLAN infrastructure
Occasionally it is necessary to temporarily deactivate or even permanently
remove a WLAN Controller-managed Access Point.
Access Point deactivation
To deactivate an Access Point, set its corresponding entry in the AP table to
'inactive' or delete the entry from the table. In the Access Point, the WLAN
modules in managed mode are switched off and the corresponding SSIDs are
deleted.
The WLAN modules and the WLAN networks (SSIDs) are still switched
off even if self-sufficient operation (’Self-sufficient operation’
→
Page 53) is activated.