manualshive.com logo in svg

Lancom WLC-4006, User Manual, Page: 22 / 113

Share
Download
Lancom WLC-4006 User Manual Download Page 22

LANCOM WLC

-

4006 -  LANCOM WLC

-

4025

 Chapter 2: Installation

22

EN

LANCOM WLC-4006

Top

LANCOM WLC-
4006 only

The two top-mounted LEDs enable the main function status to be assessed 
even if the device is positioned vertically:

Meanings of the LEDs

In the following sections we will use different terms to describe the behaviour
of the LEDs:

Blinking

 means, that the LED is switched on or off at regular intervals in

the respective indicated colour. 

Flashing

 means, that the LED lights up very briefly in the respective col-

our and stay then clearly longer (approximately 10x longer) switched off.

Inverse flashing

 means the opposite.  The LED lights permanently in the

respective colour and is only briefly interrupted.

Flickering

 means, that the LED is switched on and off in irregular inter-

vals.

���

Power

This LED provides information on the device's operating state. After being
switched on, it blinks green during the self-test. The LED then shines con-

VPN

Online

LANCOM WLC-4006

 

AP S

tatus

AP S

tatus

ETH 1ETH 1

ETH 2ETH 2

ETH 3ETH 3

ETH 4ETH 4

UplinkUplink

쐆

쐊

쐇쐄

쐂

쐃

Power

AP Status

Summary of Contents for WLC-4006


















































































































Reviews:

No comments