Lancom WLC-4006, User Manual, Page: 57 / 113

LANCOM WLC - 4006 - LANCOM WLC - 4025
Chapter 4: Configuring the WLAN Controller
57
EN
MAC address
MAC address of each Access Point.
Special values: FFFFFFFFFFFF defines the default configuration
(’Automatic provision of the default configuration’
→
Page 49).
AP name
Name of the Access Point in managed mode.
Maximum 16 ASCII characters.
Location
Location of the Access Point in managed mode.
Maximum 251 ASCII characters.
WLAN profile
WLAN profile from the list of defined profiles (’WLAN profiles’
→
Page 50).
WLAN interface 1
Frequency of the first WLAN module. This parameter can also be used to
deactivate the WLAN module.
Values: 2,4 GHz, 5 GHz, off, default
Special values: 'Default' makes use of the frequency setting defined in
the 'Options' area.
Configuration tool Call
LANconfig WLAN Controller Access Points AP table
WEBconfig, Telnet Expert configuration > Setup > WLAN management > AP configu-
ration > AP configuration