Lancom WLC-4006, User Manual, Page: 52 / 113

LANCOM WLC - 4006 - LANCOM WLC - 4025
Chapter 4: Configuring the WLAN Controller
52
EN
IP addresses, multiple values separated by commas. Maximum 159
characters, i.e. 9 to 10 entries depending on the length of the IP
addresses.
Logical WLAN networks
Here the logical WLAN networks are set for assignment to the Access Points.
The following parameters can be defined for each logical WLAN network:
Network name
Name of the logical WLAN network under which the settings are saved.
This name is only used for internal administration of logical networks.
Maximum 32 ASCII characters.
Inheritance
Selection of a logical WLAN network defined earlier and from which the
settings are to be inherited (’Inheritance of parameters’
→
Page 64).
SSID
Service Set Identifier – this name under which the WLAN network is
offered to the WLAN clients.
Configuration tool Call
LANconfig WLAN Controller Profiles Logical WLAN networks
WEBconfig, Telnet Expert configuration > Setup > WLAN management > AP configu-
ration > Networks