LANCOM WLC
-
4006 - LANCOM WLC
-
4025
Chapter 4: Configuring the WLAN Controller
62
EN
햲
Open the LANCOM WLAN Controller configuration with WEBconfig.
햳
Under
Expert configuration
Setup
WLAN management
select
the action
Accept AP
.
햴
When requested for additional arguments, enter the MAC address of the
Access Point for acceptance and confirm with
Execute
.
Accepting Access Points via WEBconfig with assignment of a certifi-
cate and configuration
New Access Points that do not have a valid certificate and do not have an
entry in the AP table can be manually accepted by means of a wizard in
WEBconfig. A configuration is selected that will be assigned to the Access
Point after transmission of a new certificate.
햲
Open the LANCOM WLAN Controller configuration with WEBconfig. If
new Access Points have been found, WEBconfig displays this with a noti-
fication on the entry page.
햳
Click on this link to start the wizard. Select the desired Access Point by
means of its MAC address and choose the WLAN configuration that is to
be assigned to the Access Point.